Crowns and bridges

A ceramic dental bridge

Who treats you, and how

Who
Dr Manisha Gupta, Principal Dentist, examines you first, plans your care and, where needed, arranges for a prosthodontist (a dentist with a postgraduate degree, MDS, in restoring and replacing teeth) to carry out the work at the clinic.
How
  • An examination first, with X-rays only when needed, and your options explained before you decide.
  • Two visits: the tooth is prepared under local anaesthetic and a temporary crown fitted, then the permanent crown is fitted.
  • Made in a dental laboratory and matched to the shade of your other teeth.
  • Instruments cleaned, packed and sterilised in our own sterilisation room.
Visits
Two.
Time
30–45 minutes per visit.
Anaesthetic
Local anaesthesia.
Recovery
A temporary crown is worn between the two visits.

Crowns

Crowns explained

Crowns, also known as caps, are artificial restorations that fit over the remaining part of a prepared tooth, thus giving it strength and the shape of a natural tooth.

Benefits

Ideal for teeth that are heavily restored with large fillings.

Improves the appearance (discoloured, malformed and misaligned teeth).

A tooth that has had root canal treatment may need a crown, or another restoration, to protect it, depending on how much of the tooth remains.

Options

Crowns can be made of a variety of different materials and new materials are being introduced all the time. Here are some of the most popular options:

Porcelain bonded to precious or non-precious metal: A precious or non precious metal base is made and then porcelain is applied in layers over it.

Porcelain crowns: These are made entirely of porcelain. They can look very natural and are most often used for front teeth.

All-ceramic crowns: This modern material is metal free. It can give the strength of a bonded crown and the appearance of a porcelain crown. This makes it suitable for use in all areas of the mouth.

The treatment plan

The teeth to be crowned are prepared which involves reduction of the tooth size (under local anaesthesia), followed by an impression or mould of the prepared tooth. The trimming of the tooth creates a space for the crown to be fitted. The mould is sent to a laboratory where skilled technicians fabricate the crown. In the meanwhile, a temporary crown is made and fitted onto the trimmed tooth.

How long does the treatment take?

You will need to have two visits. The first is to have the tooth prepared, the impressions taken, the shade matched and the temporary crown fitted. The second is to fit the permanent crown.

Will the crown be noticeable?

The crown will be made to match your other teeth as closely as possible. The shade of the neighbouring teeth will be recorded, to make sure that the colour looks natural and matches the surrounding teeth.

Bridges and partial dentures

Dental bridges literally bridge the gap created by one or more missing teeth. A bridge is made up of two or more crowns for the teeth on either side of the gap and a false tooth/teeth in between.

Why replace a tooth which is missing or needs extracting?

One reason is the way you look. It is also important to balance the way the jaw bites and avoid putting strain on the neighbouring teeth. The teeth next to the space can lean into the gap and alter the way the upper and lower teeth bite together, leading to food getting packed in the gap which causes both decay and gum disease.

How are missing teeth replaced?

There are three ways to replace missing teeth, depending on the number of teeth missing and what condition the other teeth are in.

Options:

  • Removable false teeth: This is known as partial denture.

  • Fixed bridge: A bridge is usually used where there are fewer teeth to replace, or when the missing teeth are only on one side of the mouth.

  • Implants: Where a titanium rod replaces the root of your tooth.

Partial denture

This is a plate with a number of false teeth on it. It may be only acrylic (plastic) or a mixture of metal and acrylic. Both types may have clips, to help keep the denture in place. Metal partial dentures are stronger, lighter to wear and can be supported by the remaining teeth.

Although the base is metal, they have natural looking teeth fixed to them.

Fixed bridge

A fixed bridge is made by putting crowns on the teeth at either side of the space, and then joining these two crowns together by placing a false tooth in the space.

This is all made in the laboratory and then cemented into place with special adhesives. The bridge cannot be removed for cleaning. Another option is an adhesive or ‘Maryland’ bridge. This has wings that are bonded to the back of the supporting teeth with very little drilling involved.

What are bridges made of?

Bridges are usually made of porcelain bonded to precious metal. There are also new bridges made entirely of a special type of strong porcelain.

What are the benefits of a bridge?

  • It can improve the way you look, bite, chew and speak.

  • The teeth can be matched to the colour of your own teeth.

  • A bridge can last many years if it is kept clean and there is no accidental damage.

  • Natural teeth are protected from wear and tear and from moving or tilting out of line, which can cause your teeth to bite together incorrectly.

Can a replacement tooth be fixed to the jawbone?

Yes, by having implants. The success of this technique means you may be able to replace missing teeth without crowning other teeth.

Talk to the clinic

Call, send a WhatsApp message or request an appointment online. We will contact you during clinic hours to confirm a time.

WhatsApp